How to Install Custom Recovery on Karbonn A15

Today, you’ll learn How To Flash Custom Recovery on the Karbonn A15 on Android 4.0.4 ICS with the easiest method and step by step  instructions from us. Your device must be rooted first before flashing Custom Recovery on Karbonn A15. The device has 4 GB internal storage with 512 MB of RAM. Karbonn A15 has 3.15 MP rear camera with features like Geo-tagging and face detection. The device come with some basic Android smartphone connectivity features like GPRS, EDGE, HSDPA (7.2 Mbps), Wifi b/g/n with Hotspot, Bluetooth and A-GPS support. A15 packed with a 1450 mAh battery. Karbonn A15 is a dual SIM Android smartphone. A15 has a 4-inch capacitive touchscreen display with 480 x 800 screen resolution and 233 ppi. This phone is powered with 1GHz processor.

custom recovery on karbonn a15

Before You Begin:

  1. You need a Windows Based PC or Laptop for this method.
  2. Your device must be rooted first. Click Here for step by step Rooting method.
  3. Download & Install Karbonn A15 USB Drivers from Here
  4. Enable USB Debugging on your device.Click Here if you don’t know how to enable.
  5. You device must be charged 50% minimum.


Below are some warning statements that you must be knowing before preparing to Root or Install Custom Rom in your Karbonn A15 Android Smartphone/Tablet:

  • Rooting/Installing Custom ROM is not an authorized process hence you’ll be losing all your warranty benefits over your Karbonn A15  after Rooting/Installing it.
  • There are certain risks of damaging your Android Smartphone/Tablets while Rooting/Installing Custom ROM in it. Hence, it is recommended that you proceed at your own risk and we are not to be held responsible even if your Smartphone gets damaged during or after completing the Rooting/Custom ROM installation process.
  • You might not receive any future official software or firmware updates after rooting and installing Custom ROM in your Karbonn A15.

Download Requried Files:

How To Flash Custom Rec

  • Download and place the Recovery Package on your Desktop.
  • Extract files from the package over to your Desktop.
  • Enable the USB debugging option on your device by heading to Menu>>Settings>>Developer options>>USB debugging.
  • Connect your device to your PC using the USB cable.
  • Double-click on CWM Recovery.bat and follow the on-screen instructions.
  • You should have a custom recovery up and running on your device now!


2 Responses

    • Sourya Kharb

      Sorry Ron
      But CWM Recovery is not available for Karbonn A12 till now. This recovery is also not tested on A12, but you can try it at your own risk. A15 and A12 both run on Android 4.0.4 ICS with 1 GHz processor and 512 MB of RAM but with different screen sizes and resolution a little…


Leave a Reply

Your email address will not be published.