Install Android 5.0.2 LWX49L Lollipop OTA on Moto 360

Find out How To Download And Install Android 5.0.2 LWX49L Lollipop OTA on Moto 360 using ADB Sideload easy method and instructions. Moto 360 is a smartwatch from Motorola with classic and clean design. The OTA update weighs in at 11.9 MB and brings the device to LWX49L firmware. Currently, the OTA update is rolling out in phases and it may take some time for the update to reach your notification bar. If you’re lucky enough, you should have already seen the OTA notification by now but if you haven’t, you can manually update it right now by using the mirrored OTA file. Download the below OTA file and try side loading it using the ADB commands. Bear in mind that the OTA update is still untested, so there is a possible risk in flashing it.


Image Source :


Before You Begin:

  • You need a Windows based PC or Laptop.
  • This method is working in Moto 360.
  • Download and Install Moto USB Drivers.
  • Enable USB Debugging in your Motorola Moto 360.Click Here if you don’t know how to enable.
  • Your device must be charged 50% minimum.
  • Make backup of device data for safety.

Download Required Files:

How To Install Update:

  • Follow all the steps given in Before You Begin section first.
  • Download and Extract file in a folder of your computer.
  • Now download and move the OTA update zip file and move it in the extracted folder of file.
  • Connect your device to your computer using an USB cable and reboot your device into recovery mode. You can do this from the Reboot Manager app (Search In Google Play Store).
  • Now open mfastboot extracted folder and press and hold the SHIFT button + Mouse right click and select Open command window here. If Reboot Manager App doesn’t work (type  adb reboot recovery and press enter in command prompt and it will reboot your device into Recovery mode).
  • In Recovery Mode highlight the apply update from ADB option using the Volume down button and select it using Power button.
  • Now in CMD type  the following and press Enter to install OTA Update :
    adb sideload OTA

for example OTA Update file name is type : adb sideload

  • Flashing will take few seconds after flashing type fastboot reboot in CMD and it will restart your device. First boot will take few minutes.

That’s it!! OTA Update is successfully installed in your Moto 360.

Leave a Reply

Your email address will not be published.