How To Root Xolo Play T1000 (2 Methods)

Xolo Play have 4.7-inch display with a resolution of 720X1280 pixels and pixel density of 312ppi. Xolo Play is powered by 1.5GHz quad-core Nvidia Tegra 3 processor with 416MHz 12 Core Nvidia ULP GeForce GPU. Internally, the smartphone have 1GB of RAM, 4GB of internal storage, which can be further expanded by up to 32GB through a microSD card. Xolo Play run on Android 4.1.1 (Jelly Bean). For camera, there is an 8-megapixel rear camera with BSI sensor and a 2-megapixel front snapper. The smartphones comes with a 2,000mAh battery on board. The rear camera also supports 1080pixel video recording. Xolo Play is a single SIM smartphone and will support 3G, Wi-Fi 802.11 b/g/n, Bluetooth 3.0 and GPS/ aGPS.

Xolo-Play-T10001

Today We will show you How To Root Xolo Play T1000

First Method Of Rooting For Xolo Play T1000:

1. Before You Begin:

  1. This method is tested on Xolo Play T1000 only (Please don’t try on other devices)
  2. Rooting can void your device’s warranty.
  3. Your device must charged 50% minimum.

2. Download Required Files:

No Files Required….

3. Rooting Of Xolo Play T1000:

  1. First of all reboot your device in normal mode.
  2. After it start , Launch the Dialer App.
  3. Type *7813294# and touch on Green button that you use for making a call.
  4. A new window will appear on your device’s screen , Asking for confirmation about root.
  5. Check the “I accept terms & conditions” and proceed .

Now your device is rooted….If this method doesn’t work for you try this

Second Method Of Rooting For Xolo Play T1000

1. Before You Begin:

  1. This method is tested on Xolo Play T1000 only (Please don’t try on other devices)
  2. You need a Windows based PC or Laptop.
  3. Enable USB Debugging in your device.Follow this method if you don’t know how to enable.
  4. Download & Install Xolo Play USB Drivers in your PC.
  5. Your device must charged 50% minimum.

2. Download Required Files:

  1. MotoChopper

3. Rooting Of Xolo Play T1000:

  1. Follow all the steps of Before You Begin section first.
  2. Download & Extract Motochopper zip file.
  3. Connect you device via USB cable to PC.(Don’t forgot to enable USB Debugging).
  4. Now open the folder where Motochopper zip file is extracted.
  5. You found a run.bat file their.
  6. Run the run.bat file and you see a Popup on screen asking for premission.
  7. Click On grant and your device will reboot.
  8. After successful reboot, Open the SuperSu app from App drawer.
  9. And update its binary from internet.

Congratss!!! your device is rooted now enjoy…;)

Leave a Reply

Your email address will not be published.