How To Root Samsung Galaxy S4 DoCoMo SC-04E On 5.0.1.

In this article, we’re gonna guide you about how to root Samsung Galaxy S4 DoCoMo SC-04E running on Android 5.0. Lollipop. We will use Odin Flash Tool to root the Samsung Galaxy S4 DoCoMo SC-04E with the CF-Autoroot file. The method is pretty simple and easy just follow the instructions step by step and you’ll be able to root your device.

Galaxy-S4-SC-04E

Before You Begin

  • First of all this method is only for Samsung Galaxy S4 DoCoMo SC-04E running on Android 5.0.
  • Now make sure your device is fully charged or at least 40%. Don’t blame me if your device switch off during the process and get soft-bricked.
  • You need to have a Windows based PC or Laptop for this method.
  • Download and Install USB Drivers for your Samsung device in your PC.
  • Enable USB Debugging  in your device.
  • Create a backup of all your important data.

Download Required Files

How To Root Samsung Galaxy S4 DoCoMo SC-04E

  • First of all please follow all the instructions written above step by step properly.
  • Extract the above downloaded file in a folder at your PC’s desktop. After extracting you’ll able to see following files.

chainfire-root-file

  • Now switch off your smartphone.
  • After switching-off the Smartphone, you need to boot your device into Download Mode. To do that Press and hold Volume Down, Home Button and Power Button at same time for 5-8 seconds (you have to press and hold the buttons at same time) until download mode is active.
  • In the Download mode you will be able to see a Warning Yellow Triangle Sign. Press the Volume up key to continue.

Samsung-Galaxy-Warning-Sign

  • Now run the Odin3 file in your PC (You’ll find it in the files you extracted earlier).

Open-Odin3.07-for-Samsung-Galaxy

  • After launching the Odin3 file in your PC, connect your device to PC using USB data cable.
  • Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and will show “Added” message at the lower-left panel.
  • Once your device is recognized by Odin Flash Tool, Click on the PDA button and select the CF-Auto-Root.tar file (You’ll find it in the folder where you extracted the zip file you downloaded earlier).
  • Now after all this, click on the Start button on the Odin Flash Tool to start the rooting process.
  • The whole rooting process will take less than a minute, after successful rooting you’ll see a Green PASS! message in Odin and your device will reboot automatically.
  • Now you can disconnect your device from PC.
  • Now open Applications Menu on your Smartphone and Find SuperSU App. If this app exist on your Smartphone then it means you have successfully rooted your device.

About the author

You can follow him on Twitter,
Facebook and Instagram

JOIN THE DISCUSSION